High Performance Epoxy Midcoat Solutions Industrial Seamless Epoxy Floor Intermediate Coating Systems

Product Description

Why Choose Us?

-Maintains durability 20 years! -Lifetime guarantee
-No odor -Slip-resistant
-Antimicrobial -Resists chemicals, salt, oil, and hot tires
-Dense surface resistant to bacteria, moisture and easy to clean
-Contains no solvent, allowing for interior application without harmful
-10X durability compared to kits sold in national chains

Product Description

Water-based Epoxy Intermediate Coating

Product introduction:

E336 water-based epoxy intermediate paint is a water-diluted epoxy intermediate paint, which is composed of water-based epoxy curing agent, liquid epoxy resin, deionized water and a small amount of additives.

Product use:

Floor applications in industrial plants, warehouses, underground parking lots, offices, home decoration floors, and places with high environmental requirements.

Features and advantages:

It has high compressive strength and is suitable for use as an intermediate paint for light and medium-load floors; Diluted with water, green and environmentally friendly, with low VOC emissions. Low odor and easy to construct

Product Information:

The material is divided into two components: A and B.

Component A yellow transparent liquid 18kg/barrel

Component B colorless transparent liquid 6kg/barrel

Packaging: Printed metal packaging drum. It is recommended to stack it in three layers when stacking.

Storage: Storage temperature 5-35ºC, store in a cool, ventilated, dry warehouse; keep away from fire and heat sources and strictly prohibited from exposure to sunlight

Performance parameter:

Status: Uniform, no lumps, no impurities
Bonding strength: ≥2.5MPa
Drying time: Surface dry: less than 6 hours
Solid Drying Time: less than 36 hours (Temperature is 25ºC, relative humidity is 50%)

Recommended dosage:

Surface treatment: Before construction, dust, sand, cement laitance, grease, old coatings, etc. should be removed from the base surface and polished to form a rough surface. The capillary pores on the base surface should be opened, the floating dust on the surface should be cleaned, and water-based epoxy should be used. Primer seals the base surface.

Dosage: about 0.30kg/square meters, one pass of 80-120 mesh sand and one pass of 400 mesh powder. There are big differences based on the flatness of the ground and the construction design plan.

Construction method: Mix the main agent and curing agent at a weight ratio of 3:1, and stir mechanically for 2 minutes until the mixture becomes uniform and creamy. Then add 30% water to dilute and stir evenly. Add quartz sand or quartz powder and stir evenly before scraping.

Sand adding ratio: 80-120 mesh quartz sand paint: quartz sand=1:1.5-2 (mass ratio) 200-400 mesh quartz powder paint: quartz powder = 1:0.8-1 (mass ratio)

Note: The amount of paint is the total amount of components A and B, excluding water added later.

Performance parameter:

Test items	Technical indicators
	standard value	Actual value
State	Evenly mixed without lumps	Uniform condition with no lumps
Constructability	Barrier-free roller coating	Good construction properties
Surface drying	≤6	4h
Thoroughly drying	≤24h	18h
Gel time	≥30min	40min

Various Types of Coatings to Meet Your Different Floor Needs 

HH-001 Penetrating Epoxy Primer Coat

HH-001-1 Solvent Free Epoxy Resin Primer Coat

HH-002 Epoxy Intermediate Coating High Solids Coating

HH-003 Solvent Epoxy Resin Finish Coat

HH-003-1 Epoxy Resin Highlight Finish Coat

HH-003-2 Solvent Free Epoxy Lacquer Finish Coat

HH-004 Self-leveling Epoxy Resin Finish Coat

HH-005 Epoxy Conductive Primer

HH-006 Solvent Free Anti-static Epoxy Self-leveling Finish Coat

HH-007 Solvent Anti-static Epoxy Finish Coat

HH-008 Epoxy Resin Anti-corrosion Finish Coat

HH-009 Waterborne Epoxy Primer

HH-010 Waterborne Epoxy Finish Coat

HH-011 Waterborne Epoxy Curing Agent

HH-012 Super Wear-resistant Micro-rough Finish Coat

HH-013 Epoxy Color Sand Self-leveling Finish Coat

HH-014 Solvent Free Clear Varnish

HH-015 Epoxy Iron Red (gray) Antirust Paint

HH-016 Retro Epoxy Floor Paint

-High strength, wear resistance and compression resistance, highly durable
-Waterproof and non-slip, strong adhesion, Clean and environmentally friendly, no harmful substances
-It dries quickly, and it is ready to use without delay
-Simple operation, brushing after opening the cover, low labor cost
-Scrub resistant, easy to clean and easy to care for
-The protective film has high strength and is not easy for stains to penetrate

 

Other Flooring Solutions

-High strength, wear resistance and compression resistance, highly durable
-Waterproof and non-slip, strong adhesion, Clean and environmentally friendly, no harmful substances
-It dries quickly, and it is ready to use without delay
-Simple operation, brushing after opening the cover, low labor cost
-Scrub resistant, easy to clean and easy to care for
-The protective film has high strength and is not easy for stains to penetrate

7 Step Guide on How to Apply Epoxy Floor Paint

Step 1. Preparing the surface before applying the epoxy
Step 2. Sweeping and cleaning of the floor
Step 3. How to Apply Epoxy: Prime the floor with a suitable epoxy primer
Step 4. Fill all cracks, holes etc with epoxy grout.
Step 5. Application of the first coat of epoxy paint
Step 6. Final Sanding and Filling before applying the final epoxy floor paint
Step 7 Apply the final coat.

Construction Conditions:

1. Substrate requirements
The painted surface of architectural coatings must be dry, firm, clean and smooth;
Dry: the floor humidity is lower than 6%RH, and the PH value is less than 10;
Firmness: no loose powder, no loose patent leather on the old ground;
Clean: Free of oil, grease, mildew, algae and other adherents.
2. Construction environment:
The ground temperature should not be lower than 5ºC, and the ambient humidity should be lower than 85%RH to ensure good film formation.
3. Construction precautions:

This product can be appropriately added with diluent depending on different construction methods and construction environments, but the dilution ratio should be strictly controlled. Excessive dilution of the main agent and curing agent must be mixed in the correct proportion. The main agent should be mixed with an electric mixer first. Then slowly add the curing agent and stir well.

Our Factory

 

 

Packaging & Shipping

Certifications

FAQ

Q1, Are you manufacturer or trading factory?

A: In fact we are the factory more then 10 years, can supply all types of paint.

 

Q2, If the OEM is accepted?

A: Yes, OEM is welcome. We also can do your own logo and package.

 

Q3, If I do not know which paint to choose, what shall I do?

A: Please no need to worried about this, we have the professional engineer, colorist, and experienced sales, can give you the suggestion for paint and coating.

 

Q4, What's are your payment term?

A: We can accept the TT, Western Uniono, LC, Credit card, and Alipay, and others please contact with us freely.

 

Q5, Can you accept to supply the free sample?

A: Yes, of course we are glad to supply the free sample, and you need in charge of the freight cost.

  

Q6, What's your products' advantages?

A. Good quality and competitive prices.

B. Strictly quality control when producing.

C. Professional team work, from design, development, producing,assemble,packing  and shipping.

D. Experience for shipping the paint to different countries.

 

Q7, Can we visit your factory?

You are Warmly welcomed to visit our factory, it would be our great pleasure!