| Customization: | Available |
|---|---|
| CAS No.: | Iefp |
| Color: | Various Colors |
|
Still deciding? Get samples of US$ 5/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
-Maintains durability 20 years! -Lifetime guarantee
-No odor -Slip-resistant
-Antimicrobial -Resists chemicals, salt, oil, and hot tires
-Dense surface resistant to bacteria, moisture and easy to clean
-Contains no solvent, allowing for interior application without harmful
-10X durability compared to kits sold in national chains
Epoxy High Gloss Finish Coating
Product introduction:
Application scope:
It is mainly suitable for the protection and decoration of floors in factories, warehouses, parking lots, hospitals, canteens and other industrial buildings and residential buildings. It can be sprayed and rolled.
Material advantages:
1.The paint film is full and the colors are bright and rich
2.Smooth and bright, beautiful and seamless
3.Excellent leveling performance, no roller marks.
Packing:
IEFP-003A spreading epoxy topcoat main agent 20kg/barrel
IEFP-003B spreading epoxy topcoat curing agent 5kg/barrel
Performance parameter:
|
State |
Stirring without agglomeration or mechanical impurities |
|
Bonding strength |
≥2.5MPa |
|
Compressive strength |
≥70MPa |
|
Hardness |
>2H |
|
Wear resistance |
<0.05 |
|
Drying time (Temperature is 25ºC, relative humidity is 70%)
|
Surface drying: <6h |
|
Actual drying: <48h |
Recommended dosage:
About 0.25-0.35 kg/square meter, there will be certain differences between different colors.
Ratio and opening hours:
The ratio of main agent to curing agent is 4:1 (weight ratio), and must be mixed and stirred strictly according to the ratio before construction. The prepared paint needs to be used within 45 minutes. If the opening time exceeds 45 minutes, it cannot be used normally and will be scrapped.
Various Types of Coatings to Meet Your Different Floor Needs
| HH-001 Penetrating Epoxy Primer Coat |
| HH-001-1 Solvent Free Epoxy Resin Primer Coat |
| HH-002 Epoxy Intermediate Coating High Solids Coating |
| HH-003 Solvent Epoxy Resin Finish Coat |
| HH-003-1 Epoxy Resin Highlight Finish Coat |
| HH-003-2 Solvent Free Epoxy Lacquer Finish Coat |
| HH-004 Self-leveling Epoxy Resin Finish Coat |
| HH-005 Epoxy Conductive Primer |
| HH-006 Solvent Free Anti-static Epoxy Self-leveling Finish Coat |
| HH-007 Solvent Anti-static Epoxy Finish Coat |
| HH-008 Epoxy Resin Anti-corrosion Finish Coat |
| HH-009 Waterborne Epoxy Primer |
| HH-010 Waterborne Epoxy Finish Coat |
| HH-011 Waterborne Epoxy Curing Agent |
| HH-012 Super Wear-resistant Micro-rough Finish Coat |
| HH-013 Epoxy Color Sand Self-leveling Finish Coat |
| HH-014 Solvent Free Clear Varnish |
| HH-015 Epoxy Iron Red (gray) Antirust Paint |
| HH-016 Retro Epoxy Floor Paint |
7 Step Guide on How to Apply Epoxy Floor Paint
Step 1. Preparing the surface before applying the epoxy
Step 2. Sweeping and cleaning of the floor
Step 3. How to Apply Epoxy: Prime the floor with a suitable epoxy primer
Step 4. Fill all cracks, holes etc with epoxy grout.
Step 5. Application of the first coat of epoxy paint
Step 6. Final Sanding and Filling before applying the final epoxy floor paint
Step 7 Apply the final coat.
Construction Conditions:
1. Substrate requirements
The painted surface of architectural coatings must be dry, firm, clean and smooth;
Dry: the floor humidity is lower than 6%RH, and the PH value is less than 10;
Firmness: no loose powder, no loose patent leather on the old ground;
Clean: Free of oil, grease, mildew, algae and other adherents.
2. Construction environment:
The ground temperature should not be lower than 5ºC, and the ambient humidity should be lower than 85%RH to ensure good film formation.
3. Construction precautions:
This product can be appropriately added with diluent depending on different construction methods and construction environments, but the dilution ratio should be strictly controlled. Excessive dilution of the main agent and curing agent must be mixed in the correct proportion. The main agent should be mixed with an electric mixer first. Then slowly add the curing agent and stir well.
Q1, Are you manufacturer or trading factory?
A: In fact we are the factory more then 10 years, can supply all types of paint.
Q2, If the OEM is accepted?
A: Yes, OEM is welcome. We also can do your own logo and package.
Q3, If I do not know which paint to choose, what shall I do?
A: Please no need to worried about this, we have the professional engineer, colorist, and experienced sales, can give you the suggestion for paint and coating.
Q4, What's are your payment term?
A: We can accept the TT, Western Uniono, LC, Credit card, and Alipay, and others please contact with us freely.
Q5, Can you accept to supply the free sample?
A: Yes, of course we are glad to supply the free sample, and you need in charge of the freight cost.
Q6, What's your products' advantages?
A. Good quality and competitive prices.
B. Strictly quality control when producing.
C. Professional team work, from design, development, producing,assemble,packing and shipping.
D. Experience for shipping the paint to different countries.
Q7, Can we visit your factory?
You are Warmly welcomed to visit our factory, it would be our great pleasure!
){kind=link}