Hot Sale No Odor Slip Resistant Deep Penetrating Epoxy Primer and Sealer Epoxy Coated Floor Garage Epoxy Flooring Paint

Product Description

Why Choose US

-Maintains durability 20 years! -Lifetime guarantee
-No odor -Slip-resistant
-Antimicrobial -Resists chemicals, salt, oil, and hot tires
-Dense surface resistant to bacteria, moisture and easy to clean
-Contains no solvent, allowing for interior application without harmful
-10X durability compared to kits sold in national chains

Product Description

 

Deep Penetrating Epoxy Primer and Sealer

Product introduction:

HH-001 is a two-component solvent-based primer composed of epoxy resin, aliphatic amine curing agent additives and high boiling point agent;

Product use:

HH-001 scope of application: The back cover of the concrete floor is dust-proof and the floor is dust-proof; it is mainly matched with various epoxy or polyurethane floor paints;

Features and advantages:

1.Strong penetration type: penetrate into the interior of the concrete base to increase the strength of the base;

2.Good binding force and good flexibility: it is completely bonded with the base material and integrated into one body to enhance the adhesion of the topcoat;

3.Low odor, solid content ≥70%;

4.Fusion: deep penetration, perfect combination;

Packing:

A component: 18kg B component: 9kg

Performance parameter:

state in container	After stirring and mixing, it is uniform and has no hard lumps
Surface dry time,h	3h dried
actual dry time,h	18h dried
Coating Appearance	Normal
Adhesion/level,≤1	1
Compressive strength/MPa,≥45	60

Recommended dosage:

HH-001 penetrating epoxy primer dosage: 0.15KG/square meters

Various Types of Coatings to Meet Your Different Floor Needs 

HH-001 Penetrating Epoxy Primer Coat

HH-001-1 Solvent Free Epoxy Resin Primer Coat

HH-002 Epoxy Intermediate Coating High Solids Coating

HH-003 Solvent Epoxy Resin Finish Coat

HH-003-1 Epoxy Resin Highlight Finish Coat

HH-003-2 Solvent Free Epoxy Lacquer Finish Coat

HH-004 Self-leveling Epoxy Resin Finish Coat

HH-005 Epoxy Conductive Primer

HH-006 Solvent Free Anti-static Epoxy Self-leveling Finish Coat

HH-007 Solvent Anti-static Epoxy Finish Coat

HH-008 Epoxy Resin Anti-corrosion Finish Coat

HH-009 Waterborne Epoxy Primer

HH-010 Waterborne Epoxy Finish Coat

HH-011 Waterborne Epoxy Curing Agent

HH-012 Super Wear-resistant Micro-rough Finish Coat

HH-013 Epoxy Color Sand Self-leveling Finish Coat

HH-014 Solvent Free Clear Varnish

HH-015 Epoxy Iron Red (gray) Antirust Paint

HH-016 Retro Epoxy Floor Paint

-High strength, wear resistance and compression resistance, highly durable
-Waterproof and non-slip, strong adhesion, Clean and environmentally friendly, no harmful substances
-It dries quickly, and it is ready to use without delay
-Simple operation, brushing after opening the cover, low labor cost
-Scrub resistant, easy to clean and easy to care for
-The protective film has high strength and is not easy for stains to penetrate

7 Step Guide on How to Apply Epoxy Floor Paint

Step 1. Preparing the surface before applying the epoxy
Step 2. Sweeping and cleaning of the floor
Step 3. How to Apply Epoxy: Prime the floor with a suitable epoxy primer
Step 4. Fill all cracks, holes etc with epoxy grout.
Step 5. Application of the first coat of epoxy paint
Step 6. Final Sanding and Filling before applying the final epoxy floor paint
Step 7 Apply the final coat.

 

Construction Conditions:

1. Substrate requirements
The painted surface of architectural coatings must be dry, firm, clean and smooth;
Dry: the floor humidity is lower than 6%RH, and the PH value is less than 10;
Firmness: no loose powder, no loose patent leather on the old ground;
Clean: Free of oil, grease, mildew, algae and other adherents.
2. Construction environment:
The ground temperature should not be lower than 5ºC, and the ambient humidity should be lower than 85%RH to ensure good film formation.
3. Construction precautions:

This product can be appropriately added with diluent depending on different construction methods and construction environments, but the dilution ratio should be strictly controlled. Excessive dilution of the main agent and curing agent must be mixed in the correct proportion. The main agent should be mixed with an electric mixer first. Then slowly add the curing agent and stir well.

Our Factory

Packaging & Shipping

Certifications

 

FAQ

Q1, Are you manufacturer or trading factory?

A: In fact we are the factory more then 10 years, can supply all types of paint.

 

Q2, If the OEM is accepted?

A: Yes, OEM is welcome. We also can do your own logo and package.

 

Q3, If I do not know which paint to choose, what shall I do?

A: Please no need to worried about this, we have the professional engineer, colorist, and experienced sales, can give you the suggestion for paint and coating.

 

Q4, What's are your payment term?

A: We can accept the TT, Western Uniono, LC, Credit card, and Alipay, and others please contact with us freely.

 

Q5, Can you accept to supply the free sample?

A: Yes, of course we are glad to supply the free sample, and you need in charge of the freight cost.

  

Q6, What's your products' advantages?

A. Good quality and competitive prices.

B. Strictly quality control when producing.

C. Professional team work, from design, development, producing,assemble,packing  and shipping.

D. Experience for shipping the paint to different countries.

 

Q7, Can we visit your factory?

You are Warmly welcomed to visit our factory, it would be our great pleasure!