Good Flexibility Good Moisture Resistance Epoxy Resin Curing Agent for Epoxy Floor Middle Coatings or Primer Hardener

• Customization: Available
• Type: Concrete Floor Harden Agent
• Appearance: Liquid
• Model NO.: KD401A
• Certificates: ISO9001-2008
• Classification: Catalyst
• Place of Origin: Tianjin
• Purity: 99%Min
• Application: Curing Agent
• Application1: Insulated Paint
• Packaging Details: 25kg Plastic Drum
• Delivery Time: Shipped in 10 Days After Payment
• Transport Package: Plastic Bucket
• Specification: 25kg
• Trademark: kaida
• Origin: China
• Production Capacity: 10000

Product Description

Concrete and Mortar strengthening Epoxy Curing Agent, Epoxy Adhesives Epoxy Hardener

Product Features
1.Hardness: After the concrete penetration of the sealing agent treatment of the ground, Mo's hardness will reach 8, MO's hardness increased by 45.3%;
2.Wear-resistant: solidified into a hard solid, increase hardness and compactness, wear resistance will be increases to more than                                                            8 times.
3.Dustproof: The sealing agent permeates into the concrete reacting with the silicate in concrete, forming a dustless and    compact whole on the concrete surface, and permanently controls the concrete dust from the surface voids..
4.Anti-skid: general concrete ground, saline and alkaline components will be precipitated from the surface, leading to slippage.
5.Anti-pressure: compressive strength of the specimen compared to the treatment of the sample enhanced 27.3%, the flexural strength increased by 3 times.
6.Impermeability: Can effectively penetrate into the concrete, and its chemical reaction, fills ups the pores on the concrete surface leading to a permanent sealing effect, which can effectively inhibit water, oil and other surface dirt into the concrete.
7.Anti-weathering: can effectively prevent the passage of chloride ions. The test indicates that the treated ground will not be affected by exposure to electromagnetic or water mist.
8.Corrosion Resistance:Greatly improves the corrosion resistance of the concrete.

1. Brightness: After applying the sealing agent the concrete floor will appear to have a marble-like luster, with longer the use leads to better gloss.
2. Environmental protection: Colorless, odorless, non-toxic, VOC emissions 0.Why is it better to use two-part sealed Hardener?
   1.If there is a small crack in the surface after 3-5 years, each material surface, and with the extension of time will become more and more obvious..
   
   2. for the new ground, the relatively dense ground floor, can be preferred single group, simple and convenient construction, the ground beautiful. For the old cement ground loose ground, must choose the two sets of concrete seal curing agent, also may make the hard and beautiful ground.
   
   The two-part concrete sealing agent (one group is alkaline, the other is acidic) can avoid the occurrence of cracks . Its service life can be really up to 20 years.
   
   When is the sealing agent in general, what is it based on?
   Based on the actual situation on the ground. It is polished before it is polished to 150 mesh or 300 eyes.
   Before grinding, it is because the ground is loose and the hardness is raised.
   General ground or better ground, before grinding to 300 mesh can be.
   
   Is the curing agent required for the construction temperature?
   The sealing agent construction principle is above 0 degrees, 50 degrees below construction is possible. The sealing agent can not be frozen, as if its frozen it cannot penetrate. High temperature will affect the curing time.
   
   Construction technology of two-part sealing agent?
   1. Clean the ground, with professional dust pushing or washing machine to clean the ground.
   
   2. Base Surface treatment: first with 50-300 mesh grinding plate thoroughly polish the ground, to feel smooth, and use vacuum cleaners or other tools to thoroughly clean the ground dust, so that the ground pores can fully absorb materials.
   
   3. Spraying materials: after spraying dry ground CFS-300 base dense type sealing agent, use 0.15Kg/ square meters amount of the solution , need to adjust the amount according to the ground solution for up to 3 hours, standard penetration time, liquid water 1:1 diluted 1:6 solution with a soft brush and levelling the ground, in order to fully absorb the ground.
   
   4. Fine ground: 12 hours after adding a small amount of water moist ground, and light grinding machine with 300 mesh grinding piece on the ground, remove surface dirt, while using water suction device to dry the ground mud, dry 12 hours on the ground.
   
   5. Spraying B Material: After the ground is completely dry, spraying CFS-301 hardening bright sealing agent, around 0.2kg/do not need to add water permeation time of 2 hours.
   
   6. Fine Ground: add a small amount of water to moisten the ground and after 3 hours grind the ground with a 500-mill grinder with a light grinder to remove the surface dirt while using a water sucker to dry the ground mud until the ground is dry.
   
   7. Polishing the ground: Rotate the counterweight iron of the grinder to the forward gear and polish the ground with a 1000-3000 mesh grinding plate.
   
   8. To ensure ground drying, small area spraying CFS-400 polishing agent, the dosage of conventional 0.05kg/. 3-6 minutes after the surface dry immediately with a heavy grinding machine with 6000 mesh sponge polishing, the ground to achieve a bright mirror effect. Select)
   
    

Tianjin Kaida Technology Co., Ltd. manufactures floor grinding machines, laser leveling machines, solidifying agent and grinding plates. In the first three years of the operations, 20 Kaida technicians have been dedicated to the design and manufacture of floor products, testing the quality, safety and operation of the products . The company has registered KAIDA and CFS trademarks which have associated with top notch quality and impecable service delivery.
The kaida team has always strived to produce uniquely designed and high-quality products  which have consistently gained recognition and received great reviews from consumers worldwide. 
The companys philosophy is to serve intently, provide quality and constant innovation . We have sucessfuly completed more than 1000 floor related projects in China, and we warmly welcome all our global customers to test and buy our products.


FAQ

1.What is about your service?
*Your inquiry will be replied in 24 hours.
*Eight years Gold supplier continuously in the Alibaba. And there is more industrial technology experience for 25 years with our manufactures.
* To offer free spare parts and service within 14 month of warranty.
* Technology Support Provide operation video for training.
* Professional after-sales service team.
* Give reasonable offers with the best quality.
2. What is your advantages?
* Competitive price: It can meet your budget and best-selling business very well.
* OEM Accepted: We can produce as customized design.
* Good Service: We treat clients as friends and provide problem solving anytime you need.
* Good Quality: We have strict quality control system. Good reputation in the market.
* Fast & Delivery: We have big discount from forwarder (Long-term Contract).
* Door To Door Service.
3.  Can you customize the machine for the customer?
Yes. We can, we also provide OEM for customers; If you need customized service, please contact with us.
4.  What is the MOQ?
We would like to provide 1 set for you test.