Customized Compression and Bending Resistance Stamped Concrete Hardener Color Hardener for Stamp Concrete

Product Description

Product Description

Stamped Concrete Hardener

Stamped concrete reinforcing material
Stamped floor reinforcing material is a colored powdered chemical building material. This product is applied to the concrete surface in the initial setting stage, reacts chemically with the concrete, strengthens and penetrates the concrete surface, makes the concrete surface have super wear resistance and compression and bending resistance, and gives ordinary concrete rich colors.

Stamped Concrete Hardener
Performance	Base Strength	76 MPa
	Impact Resistance	67 MPa
	Moh's hardness	Moh's 6
	Abrasion Resistance	2.6 g/cm²
	Acid and Alkali Resistance	Excellent
	Flatness	3 mm

Product Benefits
Prevent the penetration of moisture
Can penetrate up to 15mm
Prevent alkalizing and weathering
Prevent internal metal corrosion
Resistance to acid attack
Increase the R factor insulation factor
Enhanced weatherability
Prevent chloride attack
Prevent mold and fungus
Simple construction
Prevent paint from peeling off

 

Construction Case:
Why is it better to use two-part sealed Hardener?
1.If there is a small crack in the surface after 3-5 years, each material surface, and with the extension of time will become more and more obvious..

2. for the new ground, the relatively dense ground floor, can be preferred single group, simple and convenient construction, the ground beautiful. For the old cement ground loose ground, must choose the two sets of concrete seal curing agent, also may make the hard and beautiful ground.

The two-part concrete sealing agent (one group is alkaline, the other is acidic) can avoid the occurrence of cracks . Its service life can be really up to 20 years.

When is the sealing agent in general, what is it based on?
Based on the actual situation on the ground. It is polished before it is polished to 150 mesh or 300 eyes.
Before grinding, it is because the ground is loose and the hardness is raised.
General ground or better ground, before grinding to 300 mesh can be.

Is the curing agent required for the construction temperature?
The sealing agent construction principle is above 0 degrees, 50 degrees below construction is possible. The sealing agent can not be frozen, as if its frozen it cannot penetrate. High temperature will affect the curing time.
 

Packaging & Shipping

Certifications

FAQ

Q1, Are you manufacturer or trading factory?

A: In fact we are the factory more then 10 years, can supply all types of paint.

 

Q2, If the OEM is accepted?

A: Yes, OEM is welcome. We also can do your own logo and package.

 

Q3, If I do not know which paint to choose, what shall I do?

A: Please no need to worried about this, we have the professional engineer, colorist, and experienced sales, can give you the suggestion for paint and coating.

 

Q4, What's are your payment term?

A: We can accept the TT, Western Uniono, LC, Credit card, and Alipay, and others please contact with us freely.

 

Q5, Can you accept to supply the free sample?

A: Yes, of course we are glad to supply the free sample, and you need in charge of the freight cost.

  

Q6, What's your products' advantages?

A. Good quality and competitive prices.

B. Strictly quality control when producing.

C. Professional team work, from design, development, producing,assemble,packing  and shipping.

D. Experience for shipping the paint to different countries.

 

Q7, Can we visit your factory?

You are Warmly welcomed to visit our factory, it would be our great pleasure!