| Customization: | Available |
|---|---|
| CAS No.: | Iefp |
| Color: | Various Colors |
|
Still deciding? Get samples of US$ 5/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
-Maintains durability 20 years! -Lifetime guarantee
-No odor -Slip-resistant
-Antimicrobial -Resists chemicals, salt, oil, and hot tires
-Dense surface resistant to bacteria, moisture and easy to clean
-Contains no solvent, allowing for interior application without harmful
-10X durability compared to kits sold in national chains
Deep Penetrating Epoxy Primer and Sealer
Product introduction:
HH-001 is a two-component solvent-based primer composed of epoxy resin, aliphatic amine curing agent additives and high boiling point agent;
Product use:
HH-001 scope of application: The back cover of the concrete floor is dust-proof and the floor is dust-proof; it is mainly matched with various epoxy or polyurethane floor paints;
Features and advantages:
1.Strong penetration type: penetrate into the interior of the concrete base to increase the strength of the base;
2.Good binding force and good flexibility: it is completely bonded with the base material and integrated into one body to enhance the adhesion of the topcoat;
3.Low odor, solid content ≥70%;
4.Fusion: deep penetration, perfect combination;
Packing:
A component: 18kg B component: 9kg
Performance parameter:
|
state in container |
After stirring and mixing, it is uniform and has no hard lumps |
|
Surface dry time,h |
3h dried |
|
actual dry time,h |
18h dried |
|
Coating Appearance |
Normal |
|
Adhesion/level,≤1 |
1 |
|
Compressive strength/MPa,≥45 |
60 |
Recommended dosage:
HH-001 penetrating epoxy primer dosage: 0.15KG/square meters
Various Types of Coatings to Meet Your Different Floor Needs
| HH-001 Penetrating Epoxy Primer Coat |
| HH-001-1 Solvent Free Epoxy Resin Primer Coat |
| HH-002 Epoxy Intermediate Coating High Solids Coating |
| HH-003 Solvent Epoxy Resin Finish Coat |
| HH-003-1 Epoxy Resin Highlight Finish Coat |
| HH-003-2 Solvent Free Epoxy Lacquer Finish Coat |
| HH-004 Self-leveling Epoxy Resin Finish Coat |
| HH-005 Epoxy Conductive Primer |
| HH-006 Solvent Free Anti-static Epoxy Self-leveling Finish Coat |
| HH-007 Solvent Anti-static Epoxy Finish Coat |
| HH-008 Epoxy Resin Anti-corrosion Finish Coat |
| HH-009 Waterborne Epoxy Primer |
| HH-010 Waterborne Epoxy Finish Coat |
| HH-011 Waterborne Epoxy Curing Agent |
| HH-012 Super Wear-resistant Micro-rough Finish Coat |
| HH-013 Epoxy Color Sand Self-leveling Finish Coat |
| HH-014 Solvent Free Clear Varnish |
| HH-015 Epoxy Iron Red (gray) Antirust Paint |
| HH-016 Retro Epoxy Floor Paint |
7 Step Guide on How to Apply Epoxy Floor Paint
Step 1. Preparing the surface before applying the epoxy
Step 2. Sweeping and cleaning of the floor
Step 3. How to Apply Epoxy: Prime the floor with a suitable epoxy primer
Step 4. Fill all cracks, holes etc with epoxy grout.
Step 5. Application of the first coat of epoxy paint
Step 6. Final Sanding and Filling before applying the final epoxy floor paint
Step 7 Apply the final coat.
Construction Conditions:
1. Substrate requirements
The painted surface of architectural coatings must be dry, firm, clean and smooth;
Dry: the floor humidity is lower than 6%RH, and the PH value is less than 10;
Firmness: no loose powder, no loose patent leather on the old ground;
Clean: Free of oil, grease, mildew, algae and other adherents.
2. Construction environment:
The ground temperature should not be lower than 5ºC, and the ambient humidity should be lower than 85%RH to ensure good film formation.
3. Construction precautions:
This product can be appropriately added with diluent depending on different construction methods and construction environments, but the dilution ratio should be strictly controlled. Excessive dilution of the main agent and curing agent must be mixed in the correct proportion. The main agent should be mixed with an electric mixer first. Then slowly add the curing agent and stir well.
Q1, Are you manufacturer or trading factory?
A: In fact we are the factory more then 10 years, can supply all types of paint.
Q2, If the OEM is accepted?
A: Yes, OEM is welcome. We also can do your own logo and package.
Q3, If I do not know which paint to choose, what shall I do?
A: Please no need to worried about this, we have the professional engineer, colorist, and experienced sales, can give you the suggestion for paint and coating.
Q4, What's are your payment term?
A: We can accept the TT, Western Uniono, LC, Credit card, and Alipay, and others please contact with us freely.
Q5, Can you accept to supply the free sample?
A: Yes, of course we are glad to supply the free sample, and you need in charge of the freight cost.
Q6, What's your products' advantages?
A. Good quality and competitive prices.
B. Strictly quality control when producing.
C. Professional team work, from design, development, producing,assemble,packing and shipping.
D. Experience for shipping the paint to different countries.
Q7, Can we visit your factory?
You are Warmly welcomed to visit our factory, it would be our great pleasure!
){kind=link}