Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp

Product Details
Customization: Available
Warranty: 24 Months
Feature: Automation, High Efficiency

360° Virtual Tour

Diamond Member Since 2018

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Management System Certification
ISO 9000
  • Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp
  • Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp
  • Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp
  • Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp
  • Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp
  • Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp
Find Similar Products

Basic Info.

Model NO.
DX68 with wheels
Condition
New
Product Name
Top 1/4′′-2′′ 4sp Hydraulic Hose Crimping Machine
Crimping Range
1/4" to 2"
Max Crimping Force
530t
Scale Accuracy
0.02mm
Opening Without Dies
122mm
Oil Pump Displacement
5ml/Rad (380V 50Hz);2.5ml/Rad(220V 50Hz)
Overall Dimensions
800*530*870 mm
Dies Sizes
15, 18, 23, 26, 31, 36, 41, 47, 55, 61
Weight
260kg
Max Crimping Force
449t
Rated Pressure
31.5MPa
Mold Quantity
10 Sets
Type
Gantry Hydraulic Press
Certification
ISO9001, CE
Transport Package
Wooden Case or as Buyer Required
Specification
800*530*870  mm
Trademark
HENGHUA
Origin
Tianjin, China
HS Code
8462919000
Production Capacity
10000 Sets Per Month

Product Description

Please note: Some merchants copy our product texts, only the Henghua brand has German technology and patent certificates.
Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp


Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp
Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp
hose crimping machine
Model DX68 DX76 DX102 DX150
Crimping range 6-51mm(1/4" ~2") 6~76mm ( 1/4~3" ) 6~102mm ( 1/4~4" ) 6-150mm(1/4~6")
Max crimping Force 449T 500T 1400T 2500T
Rated Pressure 31.5MPa 50Mpa 31.5Mpa 31.5Mpa
Weight 250kg 300kg 520kg 900kg
Mold Quantity 10 sets 13Sets 16Sets 17Sets
Power 3KW/4KW  4KW 4KW/5.5KW/7.5KW 4KW/5.5KW/7.5KW
Voltage 220V/380V 240V / 380V 380V or customized 380V or customized
Scale accuracy 0.02mm 0.02mm 0.01mm 0.01mm
Overall dimensions 670*490*780mm 730*470*930mm 900*790*1070mm 1030*630* 1160mm

Brief Introduction
Model DX68 pipe locking machine is mainly used for buckling processing for high pressure rubber pipe assembly in the mechanical engineering. It can also be used for buckling the two-way bends, especially large bends and irregular shape bends.
This machine features small and portable appearance, big force, low noise and easy to oper- ate. The buckling amount can be precise adjusted through a scale. It makes the mould base division to be more even through the double inclined plane eight-flap mould seat equipped with a high accuracy guiding device.

Main Technical Feature
Buckling range: Φ4mm-Φ51mm(2 layers steel wire rubber hose) Max. buckling force: 449T
Scale accuracy: 0.02mm Rated pressure: 31.5 MPa
Oil pump displacement: 5ml/rad (380V); 2.5ml/rad (220V) Overall dimensions: 670(L)×490(W)×780(H)mm


Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp
Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp
Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp

Installation and Operation
 
1.Add sufficiently 79 liters of Great Wall brand 46# anti-abrasion hydraulic oil. If the room tem- perature is lower than 10ºC, 10% transformer oil is need to add.
Connect the electric source well as per the machine requirements, to make the direction of the motor rotation to be consistent with the rotation direction marking, and grounding protection shall be done.

2.Regulating the scale
The scale is used for regulating the amount of the buckling. When it is regulated clockwise, the buckling amount will decrease, when it is regulated anticlockwise, the buckling amount will increase. The scale is connected together with oil cylinder end cover through three socket head screws and three springs on the scale base. When using a hand to pull the scale (vertical to the oil cylinder end cover direction), the scale can flexibly leave from the oil cylinder end cover. When releasing the scale, the scale will be recovered relying on spring force. Before the machine is turned on, inspect carefully if the scale telescoping is flexible and if the lead con- nection is reliable.

3.The primary scale is turned within 0 line of the secondary scale, turn the machine on for test run, and observe if all actions are normal. If when the piston conducts reciprocating move- ment, there is a crawling phenomenon, the bleed screw on the oil cylinder top shall be unscrewed for exhausting air.

4.Pressure regulation
The buckling pressure and opening mould pressure will be regulated through two knobs at the back of the oil cylinder (see figure), when it is regulated clockwise, the pressure will increase, when it is regulated anticlockwise, the pressure will decrease (The pressure has already been well regulated when ex-factory).

5.Operation
Based on the size of the rubber hose to be buckled, select suitable mould as per the technical parameter reference table of the locking pipe and mount it on the mould base. Regulated well the scale position as per the data in the data in the table, the pipe locking can be done. After pipe locking, use a vernier caliper to mease the outside diameter dimension of the pipe sleeve after buckling to see if it meets the reference table data of the parameter. If it does not meet the data, the scale shall be precisely regulated until it meets the requirements. Because the manufactures of the pipe sleeve are different, so, specific dimension, material, hardness etc are certainly not the same. These factors would result different influences on the pipe locking result, therefore, the data in the table is only for reference, the detailed data take the pressure test as the basis.


Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp
Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp
Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp
Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp

Notices
1.When buckling, make the joint to locate the mould center as much as possible, the joint is not buckled on the hex nut.
2.Prevent tool and other foreign matter from entering the locking head.
3.After the work is finished for each time, the eight-block mould base must be made to extend to the greatest extent, this can make the spring to be at extension status. If not, the spring will be damage.
4.When working, the hand should not stretch into the locking head.
5.The power supply must be switched off when maintenance is done.

Maintenance and Care
Maintenance
The hydraulic oil in the oil tank should be frequently checked, if oil amount is found to be insuf- ficient, the oil shall be timely supplemented. If the oil liquid is polluted, it shall be filtered or replaced.
The locking head shall keep internal cleanliness. Avoid the foreign matters during processing to enter into the locking head oil cylinder via the mould to affect the normal use. Wipe out the foreign matters, which are brought by the mould body in time when buckling the joint.
Frequently fill suitable grease into the mould body for lubrication.


Promise
We will provide a guarantee to keep the machine in good repair within 12 months from the day when the machine is purchased. All fitting troubles will be free of charge repaired (or replaced if necessary) during the guarantee period. The damage resulted from improper use o accident damage does not belong to free of charge repair range.

The Packing List
1.The high pressure locking tube machine in model DX 68 one set
2.Mold (Total 10 Sets)Φ6 1 set
Φ10 1 set
Φ13 1 set
Φ16 1 set
Φ19 1 set
Φ22 1 set
Φ25 1 set
Φ32 1 set
Φ38 1set
Φ51 1set

FAQ:

 1. What level of service do you provide ?

*Your inquiry will be replied in 24 hours.

*Eight continuous years as an Alibaba Gold supplier and more than 25 years industrial technology and manufacturing experience .

* We offer free spare parts and service within 14 month warranty period.

* Technology Support by providing operation training videos .

* Professional after-sales service team.

* Give reasonable offers with the best quality.

2. What is our advantages?

* Competitive price: We can meet your budget and best-selling business very well.

* OEM Accepted: We can produce customized design.

* Good Service: We treat clients as friends and provide problem solving anytime you need.

* Good Quality: We have strict quality control system. Good reputation in the market.

* Fast & Delivery: We have big discount from forwarder (Long-term Contract).

* Door To Door Service.

3.  Can you customize the machine for the customer?

Yes. We can, we also provide OEM for customers; If you need customized services, please contact us

4.  What is the MOQ?

We usually provide 1 set for customers to test.




Troubleshooting
Trouble phenomena Trouble reason Eliminating method
Machine has not action Oil tank has not been filled with oil Fill oil as per requirement
Motor rotation direction is not correct Regulate two phase lines
Electric trouble Overhaul electric circuits
Scale is damaged The scale is fastened on the oil cylinder end face by the screw Regulate the scale as per the instruction to make scale to telescope freely
Conductor at scale location is connected with scale Anew connect the scale conductor to make it to be insulated from scale base
Electric trouble Overhaul electric circuits and electric elements
Scale conductor cutting Anew connect scale
System pressure is excessively low Adjust buckling pressure-regulating valve
No buckling The valve core of solenoid reversal valve is seizured by foreign matters Dismount solenoid reversal valve, use gasoline to clean the valve core.
Electric trouble Overhaul electric circuits
Mould is not opened Opening mould pressure is excessively low Adjust opening mould pressure regulating valve
Electric trouble Overhaul electric circuits
Big noise Installation is not stable Conduct horizontal stable installation
Hydraulic oil is excessively dirty Filter or change it
Filter is blocked Use gasoline to clean the filter
Mould base crawls Gas in the hydraulic oil has not bee exhausted completely Suitable unscrew the bleed screw, make the piston in the oil cylinder to move back to last position to exhaust gas, then screw down bleed screw.
Lubrication is poor Smear grease on the working inclined face of mould base
Oil leakage Joint is not tightened closely Tighten the oil pipe joint
Sealing washer is damaged.
 

A parameter list of the tooting and the press force for every type of rubble tube(for reference)


order

Inner diameter of the rubble tube
Outer diameter of the
rubble tube

Used tooting
Half locking & pressing meter pressure MPa Whole locking & pressing meter pressure MPa

1

Φ6
  Φ15 Φ17
Φ15
5.5
6
6~8
9~11

2

Φ10
  Φ19 Φ21
Φ21
6.5~7
7.5~8
10~11
13~16

3

Φ13
  Φ23 Φ25 Φ27
Φ25

8.5~9
10~11

14~17
15~18

4

Φ16
 
Φ26 Φ28

Φ28

9~10
10~11

15~18
18~22

5

Φ19
  Φ29 Φ31 Φ35
Φ30
9
11~12
22~24
15~17
20~22
29~31

6

Φ22
  Φ32 Φ34 Φ38
Φ34
12~13
14~16
20~25
17~19
19~21
25~30

7

Φ25
  Φ36 Φ38 Φ42
Φ38
10~11
15~16
26~28
16~18
20~24
28~32

8

Φ32
  Φ44 Φ46 Φ50
Φ42 Φ45
12~13
16~18
32
18~22
30~34
32~38

9

Φ38
  Φ50 Φ52 Φ60
Φ50 Φ55
14
20
26~30
22~26
28~32
44~48

10

Φ51
  Φ63 Φ65 Φ69
Φ60 Φ65
25
30
35
26~28
40
48

If any confusion, pls contact:

Hana  (Sales Manager)
Mob./ : +8618522425988
 
Tel: 86-22-83859655
 

 

Is there any other type machine I can choose?

We offer various types of hose crimping machine. If you are interested in any one, Any questions are welcome.

Hydraulic Hose / Pipe Crimping Machine with Wheels Easy to Push with Ce China Factory 6~51mm  (1/4~2") 4sp
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier
Product Groups
More