Impact Resistance Solvent Free Epoxy Floor Paint for Heavy Traffic Zone

Product Description

Why Choose US

-Maintains durability 20 years! -Lifetime guarantee
-No odor -Slip-resistant
-Antimicrobial -Resists chemicals, salt, oil, and hot tires
-Dense surface resistant to bacteria, moisture and easy to clean
-Contains no solvent, allowing for interior application without harmful
-10X durability compared to kits sold in national chains

Product Description

Solvent-free Epoxy Solids Middle Coating

Product introduction:

HH-002 is a two-component solvent-free intermediate coating composed of low-viscosity epoxy resin main agent, epoxy curing agent as the main film-forming substance, and non-reactive diluent;

Product use:

HH-002 scope of application: Applicable to various ground coatings, with good bonding ability;

Features and advantages:

01.High water resistance, salt water resistance, oil resistance, solvent resistance and chemical resistance

02.Good adhesion to the primer, tough paint film, good wear resistance, thick film coating; low voc has excellent reloading performance on the top coat; good construction performance;

Packing:

A component: 20kg B component: 5kg

Performance parameter:

state in container	After stirring and mixing, it is uniform and has no hard lumps
Surface dry time,h	3h dried
actual dry time,h	20h dried
Coating Appearance	Normal
Adhesion/level,≤1	1
Compressive strength/MPa,≥45	60

 

Recommended dosage:

HH-002 solvent-free epoxy intermediate coating dosage: 0.3-1KG/square metre

 

Various Types of Coatings to Meet Your Different Floor Needs 

HH-001 Penetrating Epoxy Primer Coat

HH-001-1 Solvent Free Epoxy Resin Primer Coat

HH-002 Epoxy Intermediate Coating High Solids Coating

HH-003 Solvent Epoxy Resin Finish Coat

HH-003-1 Epoxy Resin Highlight Finish Coat

HH-003-2 Solvent Free Epoxy Lacquer Finish Coat

HH-004 Self-leveling Epoxy Resin Finish Coat

HH-005 Epoxy Conductive Primer

HH-006 Solvent Free Anti-static Epoxy Self-leveling Finish Coat

HH-007 Solvent Anti-static Epoxy Finish Coat

HH-008 Epoxy Resin Anti-corrosion Finish Coat

HH-009 Waterborne Epoxy Primer

HH-010 Waterborne Epoxy Finish Coat

HH-011 Waterborne Epoxy Curing Agent

HH-012 Super Wear-resistant Micro-rough Finish Coat

HH-013 Epoxy Color Sand Self-leveling Finish Coat

HH-014 Solvent Free Clear Varnish

HH-015 Epoxy Iron Red (gray) Antirust Paint

HH-016 Retro Epoxy Floor Paint

-High strength, wear resistance and compression resistance, highly durable
-Waterproof and non-slip, strong adhesion, Clean and environmentally friendly, no harmful substances
-It dries quickly, and it is ready to use without delay
-Simple operation, brushing after opening the cover, low labor cost
-Scrub resistant, easy to clean and easy to care for
-The protective film has high strength and is not easy for stains to penetrate

7 Step Guide on How to Apply Epoxy Floor Paint

Step 1. Preparing the surface before applying the epoxy
Step 2. Sweeping and cleaning of the floor
Step 3. How to Apply Epoxy: Prime the floor with a suitable epoxy primer
Step 4. Fill all cracks, holes etc with epoxy grout.
Step 5. Application of the first coat of epoxy paint
Step 6. Final Sanding and Filling before applying the final epoxy floor paint
Step 7 Apply the final coat.

 

Construction Conditions:

1. Substrate requirements
The painted surface of architectural coatings must be dry, firm, clean and smooth;
Dry: the floor humidity is lower than 6%RH, and the PH value is less than 10;
Firmness: no loose powder, no loose patent leather on the old ground;
Clean: Free of oil, grease, mildew, algae and other adherents.
2. Construction environment:
The ground temperature should not be lower than 5ºC, and the ambient humidity should be lower than 85%RH to ensure good film formation.
3. Construction precautions:

This product can be appropriately added with diluent depending on different construction methods and construction environments, but the dilution ratio should be strictly controlled. Excessive dilution of the main agent and curing agent must be mixed in the correct proportion. The main agent should be mixed with an electric mixer first. Then slowly add the curing agent and stir well.

Our Factory

Packaging & Shipping

Certifications

 

FAQ

Q1, Are you manufacturer or trading factory?

A: In fact we are the factory more then 10 years, can supply all types of paint.

 

Q2, If the OEM is accepted?

A: Yes, OEM is welcome. We also can do your own logo and package.

 

Q3, If I do not know which paint to choose, what shall I do?

A: Please no need to worried about this, we have the professional engineer, colorist, and experienced sales, can give you the suggestion for paint and coating.

 

Q4, What's are your payment term?

A: We can accept the TT, Western Uniono, LC, Credit card, and Alipay, and others please contact with us freely.

 

Q5, Can you accept to supply the free sample?

A: Yes, of course we are glad to supply the free sample, and you need in charge of the freight cost.

  

Q6, What's your products' advantages?

A. Good quality and competitive prices.

B. Strictly quality control when producing.

C. Professional team work, from design, development, producing,assemble,packing  and shipping.

D. Experience for shipping the paint to different countries.

 

Q7, Can we visit your factory?

You are Warmly welcomed to visit our factory, it would be our great pleasure!